JSC "Uralsk plant" Zenith"
Address: WKO, Uralsk, st. Saraishyk, 28
Tel./fax: 8 (7112) 51-40-06; 51-38-06; 51-30-09 (fax),
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.; This email address is being protected from spambots. You need JavaScript enabled to view it.
Horizontal cylindrical steel tanks for storage of petroleum products with a capacity of 25 m 3 and 50 m 3 for underground installation.
Dimensions of the container 25 m 3 : diameter 2.8 m; length 4.3m; height (with hatch) 3.1m;
weight 2.4t; tank wall thickness 4mm.
Dimensions of the container 50 m 3: diameter 2.8 m; length 9.05m; height (with hatch) 3.1m;
weight 4.4t; tank wall thickness 5mm.
Structural steel tanks - st.3 are intended for storing dark and light oil products with a density of up to 1.0 t / m 2 at an internal overpressure in the gas space of 0.04 MPa and 0.07 MPa or vacuum 0.001 MPa depending on the requirements of the Customer.
The tanks are offered in two versions No. 1 and No. 2.
The design of the tank in version No. 1 is a cylindrical tank with flat bottoms, 800 mm neck with a flat lid protruding above the top of the tank body and a manhole according to GOST 12.3.016.-87. Stiffening rings are located inside the tank body along the length. The tank is equipped with transport hooks.
The design of the reservoir in version No. 2 is similar to version No. 1. The difference is in the installation of a partition dividing the tank into two parts, and in the presence of two necks.
Tanks are tested by non-destructive testing (X-ray testing of up to 25% of welds as agreed with the Customer) and for tightness.